|
| |
Bug Detectors
PRO CONTACT MICROPHONE |
 |
This Super High Power Acoustic
Contact Microphone certainly meets the qualifications for the
best in it's class! The small acoustic "super sensor" pick-up is
simply placed against any surface and all sound vibrations will
be amplified up to 100 times via our portable 1 watt RMS
amplifier and fed into specially manufactured perfectly matched
active noise cancellation stereo headphones. The result is truly
incredible.
The "super sensor" pick-up can be
mounted to any solid surface using the included acoustical
"putty". When removed, special putty can be reused again and
again. 4 "squares" of putty are included in kit.
Our special amplifier is made in
Israel by an Israeli military TSCM contractor to our
specifications. Amplifier features volume control, background
noise filter switch, and 3.5mm output jacks for headphone and
recording device. Operated for up to 25 hours on a 9 volt
battery.
The "ReSound" active noise
canceling foldable stereo headphones frees user from any
unwanted noise and provides private listening even in noisy
environments. These headphones are very comparable with national
brand (Bose) headphones priced at almost $299.00. They also can
be used in all stereo, MP3, CD, Airplanes (movies) and other
types of applications. Adaptors, carry bag, and 2 "AAA"
batteries are included.
Headphone Features: Travel-fold
design for compact portability - Large driver units for rich and
powerful sound - full size earcups provide long-lasting comfort
- operate as passive headphones when noise canceling circuit is
not activated.
Applications:
- TSCM acoustic leakage:
Determine the level of acoustic leakage from inside a
structure to the outside or from one room to another to
access the level of risk that exists for eavesdropping
attempts.
- Bomb Detection:
Listen to packages for sounds indicating timer operation
such as a ticking clock.
- Diagnostics: Useful
for finding problems in engines, transmissions, and other
mechanical apparatus.
- Pest Control: Quickly
locate active termite colonies and other insect or rodent
infestations in walls, ceilings, and floors.
- Plumbing: Find
locations of leaky pipes in concrete or walls.
Order this
product in our online store
|
DD2020 |
 |
Our pocket size
Personal Radio Frequency Detector locates stuck transmitters or
bugging devices in a room or automobile. This personal RF
detector excels at silent detecting of RF signals for RF
security and counter-surveilance applications.
- Internal NiCD battery pack
- Vibration motor and earphone for private detection
- 5 section bar graph to show relative RF signal strength
- Low power consumption
- 1 MHz - 6 GHz Frequency range
- Sensitivity adjustment
- 9V DC 300mA power
- AC wall charger
- 2.4 GHz antenna
- Earphone
- Users manual
- 3 3/4″ x 2 3/4″ x 1 1/4″
Order this
product in our online store
|
DD700 |
 |
This hand held
multifunctional sweep unit with RF VERIFICATION
mode allows the user to eliminate false "alerts" by actually
hearing the transmitted signal and easily finding it's origin.
Perform professional quality sweeps with ease and portability.
The DDR700 sniffs out wireless tapping devices, wireless hidden
cameras, laser taps, phone line taps including internet and IP
phones, and real-time vehicle trackers. Includes telephone
interface to quickly find hidden telephone tapping devices.
- Detection of wireless tapping
- Sensitivity: 20dB
- Frequency range: 100Hz-3.5 GHz
- Laser tap detection
- 360 degree wavelength 850 – 1,050nm
- Laser tap protection
- 10 step color LED indication
- 9 Volt battery
- Detection mode 16 to 18 hours
- Laser tap protection mode 8 to 10
hours when used continuously
AC adapter
- Hand held detection unit
- Telephone interface
- Ear phones
- AC adapter
- CD
- Carry Case Size
2 1/4″ x 5″ x 1″
Order this
product in our online store
|
CAMERA HUNTER |
 |
This bug detector is ideal for find
wireless cameras and transmitters. It can even lock on to a
wireless video signal and display on it's screen.
- 2.5-inch monitor
- Intelligent panel and smart
key for easy use
- Manual/auto operation modes
offered simultaneously
- LCM indicator to show the
status
- Wide frequency coverage
- Alarm signal output for
wider application
- Aluminum-mag alloy case in a
compact and rugged outlook design
- Internal disposable battery
power and external consistency AC adaptor exist
- Scanning range: 900 to
2520MHz
- Operation mode: auto/manual
- Antenna head: SMA (detacheable)
- Battery life: 3 hours
- Internal power: AA battery
1.5V x 4
- External power: 5VDC/750mA
- Video display: 2.5-inch
colour TFT monitor
- Frequency display: LCM
- Auto scan mode: 10 to 20
seconds/cycle (L~H)
- Manual scan mode:
1MHz/second, 10MHz/second
- Dimension (L x W x H): 120 x
74 x 35mm
- Weight: 240g
Order this
product in our online store
|
VCD-43 |
 |
To detect even very small video cameras, move up to the VCD-43.
This unit features a five-step solid-state meter that can help
you zero in on those hidden video cameras. The sensitive
external antenna is specially designed to pick up the horizontal
oscillator frequency radiated by video cameras. Once the video
camera is detected, its location can be quickly determined by
using the five-step LED meter and Sensitivity control. Tests
with various cameras show a detection range of 2 to 15 feet,
depending on the type of camera.
The unit can be factory tuned to frequencies other than the
NTSC standard; such as PAL and SECAM. For special tuning, please
specify when ordering.
The VCD-43 has a rugged aluminum housing, measures 4.25" x
2.25" x1.25", weighs 10 oz., and is furnished with two 9 volt
batteries, plug-in antenna and illustrated instructions.
Order this
product in our online store
|
SPY FINDER |
|
 |
Operating Principle
The SpyFinder hidden camera detector/locator is the
most reliable and easy to use technology on the market for making
sure that your private actions are not being watched. Its function
is based on the principle of optical augmentation. This technical
jargon refers to the phenomenon where light reflected from a focused
optical system, such as a video camera, is reflected along the same
path as the incident light. This means that if a hidden camera is
illuminated and viewed with the SpyFinder technology, then a strong
reflection from the target camera will reveal its position to the
user. The SpyFinder exploits this phenomenon by using a ring of
ultra-bright LEDs arranged around a viewing port. When a user scans
a room looking through the viewing port, a hidden camera appearing
in the field of view will brightly reflect the light from the LEDs.
Operation
While the equivalent of rocket scientists thought up
the SpyFinder technology, operating it is not rocket science. Simply
look through the viewing port and depress the button to activate the
LEDs. Slowly scan areas where hidden cameras are suspected and look
for bright reflected spots. Remember, most hidden video cameras use
pinhole camera lenses, so the spot you are looking for could be
small.
If you see a suspected camera, move your vantage
point slightly. If the location of the reflection moves as you move,
then this is not a camera. If the location of the reflection does
not move, then it is highly likely that you have discovered the
optics of a hidden camera.
For example, consider a wall clock that has a domed
plastic cover and a pinhole camera concealed under the numeral six
on the clock face. When the SpyFinder is used to scan the clock, a
reflection will be noted where the camera is located beneath the six
and a reflection will also be noted from the plastic cover. However
if you move your vantage point just a little, you will notice that
the location of the false positive reflection point from the plastic
cover will move, while the reflection from the camera remains under
the numeral six on the clock face.
Order this
product in our online store
|
CMS-15 |
 |
This kit comes with the TD-53 bug
detector with the P-O2 IR probe, the P-03 Line Driver, the
P-04 Video camera probe. This unit also comes with all the adapters and headphones and
in a professional hard shell case.
If you suspect your
premises are bugged, for your own peace of mind, check it
out. The TD-53 can be used to detect, verify and locate
hidden transmitters in your home, office or car.
Use the TD-53 to perform a professional RF sweep of your
premises, including your telephone system. Similar in
operation to a Geiger counter, the sensitive antenna system
can be used to probe all areas of a room. As the antenna
approaches the hidden transmitter, the audible tone clicks
faster and faster while the ten step solid-state meter
indicates the signal strength.
At this point, switch modes from Detect to Verify to
differentiate a bug from a regular radio or TV transmission.
If a bugging device is present, a continuous squealing tone
is generated by the TD-53. By sweeping the probe, this tone
can lead you directly to the bug. The switch selectable
SENSITIVITY level improves detection capabilities of the
unit in high signal strength areas. For private
(non-alerting) listening, an earphone jack is provided.
Included with the TD-53 is the P-01 wideband active probe
which covers 5 MHz to 2,500 MHz. The P-01 can be positioned
up to 25 feet away from the TD-53 by using an extension
cable. For example, the probe could be discreetly placed in
a target room while the TD-53 is monitored in another room.
Several other plug-in probes are available which will extend
the usefulness of your TD-53 (see the next two pages). The
unit measures 5.8" x 3.4" x 2" (with cover closed) and
weights 9 oz. It is powered by one 9 volt alkaline battery
(included). Also included is an illustrated instruction
manual.
Light beams, especially lasers, provide an excellent method
for carrying audio intelligence and are not detectable by RF
(radio frequency) detectors. The P-02 is a special probe
which allows you to search for sources of infrared (IR)
transmissions. In the case of amplitude modulated or pulse
frequency modulated sources, you can actually listen and
determine if the IR beam is carrying voice or other
intelligence.
The P-03 Line Driver Probe lets you use the TD-53 for
checking wire pairs for hidden microphones. One of the two
LEDs on the P-03 alerts you to the presence of voltage on a
wire pair. The other LED alerts you to current flow in a
wire pair when the Line Driver switch is operated.
The Line Driver switch applies a voltage to the wire pair
under test to turn on voltage activated microphones. The A/B
switch reverses the polarity of the voltage for detecting
polarity sensitive devices. You can also monitor the wire
pair through the TD-53 amplifier and speaker to determine if
room audio is present on the pair. Any of the above
conditions can indicate a microphone attached to the wire
pair under test.
The P-04 is used in conjunction with the TD-53 for detecting
carrier current transmitters and concealed video cameras.
Examples of carrier current transmitters are the wireless
intercoms and room monitors sold in many electronics stores
and catalogs. Carrier current eavesdropping devices can be
connected to power lines, phone lines or other wire pairs.
The probe covers from 10 KHz to 600 KHz in two ranges. It
uses a directional pickup loop and no connection to the
power lines or other wires under test is necessary. Any
demodulated audio is fed to the TD-53 for monitoring and
verification purposes.
Order this
product in our online store
|
MICRO BUG DETECTOR |
 |
Protect privacy and confidential information with our high
frequency RF detector. This device features a detecting
frequency up to 6 GHz and comes with an analog/digital
detection switch. The digital feature detects bluetooth,
WLAN, Wi-Fi, cellular phone and digital spread spectrum
wireless products. Specially designed for easy and simple
use with no complex installation or professional knowledge
required.
Features:
- Digital/analog switch for signal
strength
- 3 LED indicators to determine signal
strength
- Audible alarm with tonal change
indicates signal strength
- Vibration warning mode
- User can use earphones for convenient
monitoring of audible alarm
- Senstivity tuner
- 3V DC power (uses 2 AAA batteries,
included)
- 50 MHz to 6.0 GHz
- Detects wireless cameras at 5.8 GHz
from approximately 2 feet and 2.4 GHz from approximately
5 feet
- Detects analog cell phone signals
from approximately 20 feet and digital signals from
approximately 40 feet
Specifications:
- Size: (L)87 x (W)55 x (T)24 (mm)
- Weight: about 105g
- Detecting range: 50MHz~6.0GHz
- Power: 3V DC (AAA/UM-r battery x 2)
- Warning mode 1: Audible alarm and 3
LEDs
- Warning mode 2: Vibration and 3 LEDs
- Warning mode 3: Vibration, 3 LEDs and
earphone output
- Detecting distance: for regular 10mW
5.8GHz wireless camera: 8 feet
- Detecting distance: for regular 10mW
2.4GHz wireless camera: 20 feet
- Detecting distance:
- for Cellular phone: 40 feet (set at
analog)
- for Cellular phone: 60 feet (set at
digital)
Order this
product in our online store
|
|
|
